View IRHNJ54130_377954.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 93754E
RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-0.5)
Product Summary
Part Number Radiation Level IRHNJ57130 100K Rads (Si) IRHNJ53130 300K Rads (Si) IRHNJ54130 600K Rads (Si) IRHNJ58130 RDS(on) 0.06 0.06 0.06 ID 22A* 22A* 22A* 22A* QPL Part Number JANSR2N7481U3 JANSF2N7481U3 JANSG2N7481U3 JANSH2N7481U3
IRHNJ57130 JANSR2N7481U3 100V, N-CHANNEL
REF: MIL-PRF-19500/703 TECHNOLOGY
4#
c
1000K Rads (Si) 0.075
SMD-0.5
International Rectifier's R5 TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
Features:
n n n n n n n n n
Single Event Effect (SEE) Hardened Ultra Low RDS(on) Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Surface Mount Ceramic Package Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = 12V, TC = 25C ID @ VGS = 12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Pckg. Mounting Surface Temp. Weight * Current is limited by package For footnotes refer to the last page 22* 16 88 75 0.6 20 70 22 7.5 1.4 -55 to 150 300 ( for 5s ) 1.0 ( Typical )
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
g
www.irf.com
1
10/24/03
IRHNJ57130, JANSR2N7481U3
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter
BVDSS Drain-to-Source Breakdown Voltage BVDSS/TJ Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current
Min
100 -- -- 2.0 13 -- -- -- -- -- -- -- -- -- -- -- --
Typ Max Units
-- 0.11 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4.0 -- -- 0.06 4.0 -- 10 25 100 -100 50 7.4 20 25 100 35 30 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 12V, ID = 16A VDS = VGS, ID = 1.0mA VDS > 15V, IDS = 16A VDS= 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS =12V, ID = 22A VDS = 50V VDD = 50V, ID = 22A, VGS =12V, RG = 7.5
IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD
Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance
nA nC
ns
nH
Measured from the center of drain pad to center of source pad VGS = 0V, VDS = 25V f = 1.0MHz
Ciss C oss C rss
Input Capacitance Output Capacitance Reverse Transfer Capacitance
-- -- --
1005 365 50
-- -- --
pF
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD t rr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- 22* 88 1.2 250 850
Test Conditions
A
V ns nC Tj = 25C, IS = 22A, VGS = 0V Tj = 25C, IF = 22A, di/dt 100A/s VDD 25V
ton Forward Turn-On Time * Current is limited by package
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC RthJ-PCB Junction-to-Case Junction-to-PC board
Min Typ Max
-- -- -- 6.9 1.67 --
Units
C/W
Test Conditions
soldered to a 2" square copper-clad board
Note: Corresponding Spice and Saber models are available on International Rectifier Web site. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRHNJ57130, JANSR2N7481U3
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (SMD-.5) Diode Forward Voltage Up to 600K Rads(Si)1 1000K Rads (Si)2 Units Min Max Min Max 100 2.0 -- -- -- -- -- -- -- 4.0 100 -100 10 0.064 0.06 1.2 100 1.5 -- -- -- -- -- -- -- 4.0 100 -100 25 0.08 0.075 1.2 V nA A V
Test Conditions
VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20 V VDS= 80V, VGS =0V VGS = 12V, ID =16A VGS = 12V, ID =16A VGS = 0V, IS = 22A
1. Part numbers IRHNJ57130 ( JANSR2N7481U3 ), IRHNJ53130 ( JANSF2N7481U3 ) and IRHNJ54130 ( JANSG2N7481U3 ) 2. Part number IRHNJ58130 ( JANSH2N7481U3 )
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion Br I Au LET MeV/(mg/cm2)) 36.7 59.4 82.3 Energy (MeV) 309 341 350 VDS (V) Range (m) @V GS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 39.5 100 100 100 100 100 32.5 100 100 100 35 25 28.4 100 100 80 25 --
120 100 80 VDS 60 40 20 0 0 -5 -10 VGS -15 -20 Br I Au
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHNJ57130, JANSR2N7481U3
Pre-Irradiation
100
I D , Drain-to-Source Current (A)
I D, Drain-to-Source Current (A)
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
100
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
5.0V
10
10
5.0V
1 0.1
20s PULSE WIDTH T = 25 C
J 1 10 100
1 0.1
20s PULSE WIDTH T = 150 C
J 1 10 100
VDS , Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100
2.5
R DS(on) , Drain-to-Source On Resistance (Normalized)
I D , Drain-to-Source Current (A)
TJ = 25 C TJ = 150 C
ID = 22A
2.0
1.5
1.0
0.5
10 5.0
15
V DS = 50V 20s PULSE WIDTH 8.0 9.0 6.0 7.0 10.0
0.0 -60 -40 -20
VGS = 12V
0 20 40 60 80 100 120 140 160
VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature ( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHNJ57130, JANSR2N7481U3
2000
1600
VGS , Gate-to-Source Voltage (V)
VGS = Ciss = Crss = Coss = 0V, f = 1MHz Cgs + Cgd , Cds SHORTED Cgd Cds + Cgd
20
ID = 22A
VDS = 80V VDS = 50V VDS = 20V
C, Capacitance (pF)
15
1200
Ciss
10
800
C oss
5
400
C rss
1 10 100
0
0 0 10 20
FOR TEST CIRCUIT SEE FIGURE 13
30 40 50
VDS , Drain-to-Source Voltage (V)
Q G , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100
1000 OPERATION IN THIS AREA LIMITED BY R DS(on)
ISD , Reverse Drain Current (A)
10
TJ = 150 C
ID , Drain-to-Source Current (A)
100
10
TJ = 25 C
1
100s 1ms
1 Tc = 25C Tj = 150C Single Pulse 1 10 100
10ms
0.1 0.4
V GS = 0 V
0.6 0.8 1.0 1.2
0.1
VSD ,Source-to-Drain Voltage (V)
1000
VDS , Drain-toSource Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHNJ57130, JANSR2N7481U3
Pre-Irradiation
30
LIMITED BY PACKAGE
25
VDS VGS RG
RD
D.U.T.
+
I D , Drain Current (A)
20
-VDD
VGS
15
Pulse Width 1 s Duty Factor 0.1 %
10
Fig 10a. Switching Time Test Circuit
VDS 90%
5
0 25 50 75 100 125 150
TC , Case Temperature ( C)
10% VGS
td(on) tr t d(off) tf
Fig 9. Maximum Drain Current Vs. Case Temperature
Fig 10b. Switching Time Waveforms
10
Thermal Response (Z thJC )
1
D = 0.50 0.20 0.10 0.05
0.1
0.02 0.01
SINGLE PULSE (THERMAL RESPONSE)
0.01 0.00001
Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.1 0.0001 0.001 0.01 1
P DM t1 t2
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHNJ57130, JANSR2N7481U3
120
EAS , Single Pulse Avalanche Energy (mJ)
1 5V
90
TOP BOTTOM ID 9.8A 14A 22A
VDS
L
D R IV E R
RG
2VGS 0V tp
. D .U .T
IA S
60
+ - VD D
A
0 .0 1
30
Fig 12a. Unclamped Inductive Test Circuit
0 25 50 75 100 125 150
V (B R )D SS tp
Starting TJ , Junction Temperature ( C)
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
IAS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
12 V
QGS VG QGD
VGS
3mA
D.U.T.
+ V - DS
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
7
IRHNJ57130, JANSR2N7481U3
Pre-Irradiation
Footnotes:
Repetitive Rating; Pulse width limited by
maximum junction temperature. VDD = 50V, starting TJ = 25C, L= 0.3 mH Peak IL = 22A, VGS = 12V I SD 22A, di/dt 155A/s, VDD 100V, TJ 150C
Pulse width 300 s; Duty Cycle 2% Total Dose Irradiation with VGS Bias.
12 volt VGS applied and V DS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Total Dose Irradiation with VDS Bias. 80 volt VDS applied and V GS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- SMD-0.5
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 10/03
8
www.irf.com

▲Up To Search▲

Price & Availability of IRHNJ54130

	To Download IRHNJ54130 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .